Fixed-Site Iridium Equipment by BEAM

The RST100 Remote Satellite Terminal by BEAM provides voice, data, and messaging services through the Iridium network. A standard RJ-11 phone (shown for scale but not included) can be used with the RST100 system. Data at 2400 bps is supported using an RS-232 serial port. An LED display indicates the status of power, satellite signal strength, ongoing call status, and whether voicemail is waiting. The BEAM RST100 includes an AC power supply. A similar DC-powered unit, the BEAM RST110, is available for marine applications.

Options include: External Ringer/Alarm, Intelligent Handset, 20-meter cable set.

• Dimensions: 8.8" x 10.6" x 1.2" (22.5 x 27.1 x 4.5 cm)
• Rack mount console weight: 4.9 lbs (2.25 kg)
• Operating Temperature: 5°F (-15°C) to 131°F (55°C)
• Storage Temperature: -22°F (-30°C) to 158°F (70°C)
• Humidity: 93% NonCondensing
• Power: 11-32 VDC. At 12 VDC, the unit (without intelligent handset option) draws 0.35 Amps in standby, 0.51 Amps whlle transmitting. An 110/240 AC power supply is supplied with the RST100.

Docking Stations for the Iridium 9505/9505A

If you need the flexibility to take your handheld Iridium 9505A or 9505 phone on or off your vehicle or boat, we recommend a docking station. The docking station has an RJ-11 port so that you can plug in conventional analog phones and cordless phones. Sophisticated sound filtering removes most of the whine and distortion that sometimes occurs on the Iridium network. The docking station even allows DTMF reception ability (a requirement when used in concert with an onboard PBX). A ringer indicates inbound calls. Other features include status indicators and a 9-pin RS-232 data port. Your 9505A battery even charges while docked! The dock station includes an adapter for 12 VDC vehicle power and an adapter for 115-240 VAC 50/60 Hz wall power.

Options include: marine mast antenna, vehicular antenna, antenna cables from 10-meter to 25-meter, and a 10-meter antenna cable with a lightening suppressor kit. The external SIM card reader port (shown) is not currently supported.

• Emergency Command Centers
• Permanent Installations
• Commercial Fishing Operations

Fixed-Site Iridium Phones for Multiple Line PBX Applications

The MXU is a 2-channel or 4-channel rack-mountable Iridium phone system designed to be connected directly to analog phones and PBX systems. The MXU has extremely high reliability and redundancy. A roll-over feature allows incoming calls to reach unused channels. The MXU can also multiplex up to 4 data channels to achieve a combined 9600 bps data rate.

The system includes the transceiver, an antenna mounting system, and four antennas. The system uses 115-230 VAC power. An optional line simulator can be used for applications that require a dial tone.

• Dimensions: Rack: 19.0" x 20.0" x 7.0" (48.3cm x 50.8cm x 17.8cm)
• Rack mount console weight: 25lbs (11.33kg)
• Operating Temperature: 32°F (0°C) - 113°F (45°C)
• Storage Temperature: -4°F (-20°C) - 140°F (60°C)
• Humidity: 80% Relative Humidity at 104°F (40°C)
• Power: 115/230 VAC, 50/60 Hz 115 Watts
• Interface to PBX/PSTN: complies CRT21 (Europe); FCC part 68 (USA)
• Operating (transmit and receive): 1616 - 1625.5 Mhz
• Link Margin (w/exterior antenna): 12.5 dB average
• Minimum distance between antennas: 3ft. / .9144m
• Maximum loss between MXU / antennas: 3 dB Loss